28
3.1.1
Example 1: Route Source 1-1 to Output 3-2
Output 3-2 corresponds to port 2 of the SOB-H card in slot 3.
Use the following push-button sequence to achieve the resulted routing shown in the figure below:
SOURCE
1-1
(INPUT)
DESTINATION
3-2
(OUTPUT)
TAKE
Figure 3-5
Pacific MS-3: Route Source 1-1 to Destination 3-2
3.1.2 Example 2: Route Source 1-2 to Output 1-2, 2-3, and 4-3.
Output 1-2 corresponds to port 2 of the SOB-H card in slot 1.
Output 2-3 corresponds to window 3 of the SOB-QPW card in slot 2.
Output 4-3 corresponds to window 1, port 2 of the SOB-HPW card in slot 4.
Use the following push-button sequence to achieve the resulted routing shown in the figure below:
SOURCE
1-2
(INPUT)
DESTINATION
1-2
,
2-3
,
4-3
(OUTPUT)
TAKE
Figure 3-6
Pacific MS-3: Route Source 1-2 to Destination 1-2, 2-3, and 4-3
3.1.3 Example 3 (continues from Example 2): Cancel Source 1-2 routed to Output 2-3 and 4-3
Output 2-3 corresponds to window 3 of the SOB-QPW card in slot 2
Output 4-3 corresponds to window 1, port 2 of the SOB-HPW card in slot 4.
Use the following push-button sequence to achieve the resulted routing shown in the figure below:
SOURCE
1-2
(INPUT)
DESTINATION
2-3
,
4-3
(OUTPUT)
TAKE
Figure 3-7
Pacific MS-3: Cancel Source 1-2 Routed to Destination 2-2 and 4-3
