9
9
©
2005 Directed Electronics—all rights reserved
3.
Once the vehicle has started, it will run for the pre-program-
med period of time (12, 24, or 60 minutes) or until a shut-
down input is triggered. This can be set to minute increments
by your installer.
W
Wh
heen
n yyo
ou
u aarree rreeaad
dyy tto
o d
drriivvee tth
hee vveeh
hiiccllee::
1.
Insert the ignition key and turn it to the ON
(not the START) position.
2.
Press the brake pedal.
N
NO
OTTEE:: If the brake pedal is pressed before the key is in
the ON position, the engine will shut down.
While the vehicle is running during remote start operation, the sys-
tem will monitor the vehicle and will automatically shut down the
engine if the system receives any of the following shut-down inputs:
■
The brake pedal is pressed.
■
The hood is opened.
■
The shutdown toggle switch is put into the ON position.
■
The pre-programmed run time has elapsed.
■
The
button is pressed twice within 3 seconds.
