3.9.8
Auto-crop (sheet-fed scan only)
When using the feeder dock, the whole unit has a built-in cropping function to capture an
image according to the actual size of your original as illustrated below.
*This feature is available when using sheet-fed scan with the feeder dock.
Original/Auto-crop on (default)
Auto-crop off
Depending on the shape and size of your original, you may want to perform additional
manual cropping on the scanned image to achieve your desired final image. You can use the
Presto! PageManager software (included) or use your own graphic editing software.
Follow these steps to disable the auto-crop feature:
1.
With the screen displayed, press
to enter the Menu mode.
2.
Press to scroll to Auto-crop, and then press
to select it.
3.
Press to focus on desired mode, and then press to select it.
4.
Press to exit.
3.9.9
Calibration (as needed only)
If the scanned image has vertical lines or discolorations, the scanner may need to calibrate
in order for the Contact Image Sensor (CIS) to resume its color & sharpness precision.
For calibration instructions, see the “Calibrate the Scanner” section.
*Do not calibrate the scanner unless it is necessary to correct scanned image problems.
3-14
