manualshive.com logo in svg

Avision FL-0914S, User Manual

Share
Download
Avision FL-0914S User Manual Download Page 58

 

 
 
By Position: When a multi-feed is detected for the 

first time, the scanner memorizes the length and position of the 

paper attached to the document. When you perform next 

scanning, this pattern of multi-feed will be bypassed. 
To use the intelligent mode, 
1.

 

Choose your desired multi-feed detecting method to 

bypass by.  

2.

 

When multi-feed occurs during scanning, a multi-feed 

message appears. 

3.

 

Press the Scan button on the scanner. The LED indicator 

first turns to red color and then stays in green color. 

4.

 

Click OK to close the multi-feed message. 

5.

 

Open your TWAIN data source in your scanning application. 

The same multi-feed condition will not be recognized as 

multi-feed. 

 

 
Note:  

1.

 

You can clear the previous multi-feed conditions by 

clicking the Reset button. 

2.

 

The scanner can memorize to bypass up to 25 multi-feed 

conditions. 

3.

 

If you uninstall your scanner driver, the previous multi-

feed conditions which have been set to memorize and skip 

will still be valid. 

 

 

 

4-37

Summary of Contents for FL-0914S
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands