manualshive.com logo in svg

Avision FF-0506, User Manual

Share
Download
Avision FF-0506 User Manual Download Page 67

 

 

6-4

 

 

6.3

 

Replacing the ADF Snap-in Pad 

After scanning approximately 20,000 pages through the ADF, 

the pad may be worn out and you may experience problems 

with document feeding.  In this case, it is highly recommended 

to replace the pad module with a new one.  For ordering the 

pad module, please consult your nearest dealer and follow the 

procedure below to replace it.  

 

Disassembling Procedure 

 

1.

 

Press the Paper jam clearing button on the upper-left 

corner. 

2.

 

Gently open the ADF Front cover to the left.  

3.

 

Press both arms of the ADF snap-in pad module inwardly 

with your fingers to pull out the ADF snap-in pad module. 

        

 

Assembling Procedure 

 

1.

 

Take out the ADF pad module from the box. 

2.

 

Press both arms of the ADF snap-in pad module inwardly 
with your two fingers. 

3.

 

Place it into the holes until it snaps into place. 

Summary of Contents for FF-0506











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands