manualshive.com logo in svg

Avision FF-0506, User Manual

Share
Download
Avision FF-0506 User Manual Download Page 58

 

 

4-36

 

 

 

The “Reset Pad Count” button

」：

 

After scanning approximately 50,000 pages (the number varies 

based on type of scanner) through the Auto Document Feeder 

(ADF), the ADF pad may be worn out and you may experience 

problems with document feeding.  In this case, it is highly 

recommended to replace the ADF pad with a new one. (Please 

refer to the manual for proper replacing procedure.)  For 

ordering the ADF pad, please consult your nearest dealer.  

After replacing the ADF pad, click the “Reset Pad Count” 

button to reset the pad count.  

 

The “Reset Roller Count” button

」：

 

After scanning approximately 200,000 pages through the ADF, 

the ADF roller may be worn out and you may experience 

problems with document feeding.  In this case, it is highly 

recommended to replace the ADF roller with a new one.  After 

replacing the ADF roller, click the “Reset Roller Count” button 

to reset the roller count.   

Note

：

 

The lifetime and the replacing procedure vary based on type of 

scanner.  Please consult your nearest dealer for more details.   

Summary of Contents for FF-0506











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands