9-11
9.2.4.2 SCAN A SINGLE PAGE
To scan a single page, you can place your document either on the
ADF Paper Tray or on the document glass(recommended). To scan
a single page through flatbed, please do the following:
1. Raise the ADF document cover.
2. Place the page on the document glass. Observe that the top
edge of your original near the document alignment as marked
by a triangle.
MAY
0
Y
A
M
A6 A5 B5 LTR A4 LGL
A6
A5
B5
A4
LTR
3. Close the ADF document cover.
4. Start your image editing application by clicking the Start button
on the task bar and select the name of the application.
5. Choose Acquire from the File menu and click Select TWAIN
Source, for example, please select DS310F V.X.xx. (The
command to open the TWAIN source may vary due to different
applications. Please refer to the user manual of your TWAIN
application.)
6. In a minute, the TWAIN window will be displayed.
7. Select Flatbed source at the top of the TWAIN window.
8. Press the Preview button to get an initial scanned image at a
low resolution image to allocate your selected scan area.
Finally press the Scan button on the bottom of TWAIN window
or the Scan button on the Control Panel.
Your Original Correct Positioning
Summary of Contents for DS310F
