7-5
Question:
The scanned image always
comes out to be too dark.
Answer:
a) Use your application to
modify the Gamma setting to
2.2 and 1.8 for your printer and
monitor respectively.
b) Use Brightness setting
from the TWAIN user
interface to get a brighter
image.
Question:
The scanner works well
otherwise, but for the line art,
the lines scanned seem much
thicker than those of the
original.
Answer:
Use the Brightness or Threshold
setting to adjust the line art
image.
7.2
PAPER JAM IN THE ADF
In the event of paper jam, please follow the
procedures below.
i).
Open the ADF cover as shown in Figure 7-
1.
ii).
Pull the paper out of the ADF unit carefully.
Summary of Contents for AV3600
