3-1
3
Sending & Receiving Faxes
3.1 Sending a Fax
To load originals onto the flatbed glass
1.
Before sending a fax, make sure that
is illuminated in green. If it is not,
press
to enter fax mode. The default setting is Copy mode.
2.
Lift the ADF cover.
3.
Place the original document face down on the flatbed glass and align its center to
the arrow mark on the glass.
4.
Gently close the ADF cover.
5.
Customize the fax settings using the control panel buttons.
See Chapter 5 “Initial Fax Setup”, Chapter 6 “Speed dialing & phone book”,
or Chapter 7 “Special Fax”.
To clear settings, use Stop/Clear button.
the arrow mark on the glass
