7
OPTION 2
If super settings are not used, then APN settings need to be set up manually:
Command
Description
P060 (P zero six zero)
APN address
P061 (P zero six one)
APN username
P062 (P zero six two)
APN password
P063 (P zero six three)
Type of connection
These parameters must be configured by sending an SMS to the SIM card number.
Examples for various regional providers are shown below:
Carrier
P060
P061
P062
Vodafone UK
wap.vodafone.co.uk
wap
wap
DeutscheTelekom
Telekom
(blank)
(blank)
Orange France
Orange.fr
orange
orange
Other APN settings are available on the web and can be easily found online. If an APN
is incorrect for the provider or is not set up correctly, the DCP will not check into the
Avire HUB.
Important Note: The default PIN code for DCP is always 1234.
Example of an SMS for single SIM card device (for example if the SIM card is from
Vodafone):
Pin1234,P060 wap.vodafone.co.uk,P061 wap,P062 wap,P063 1
If either APN username and/or APN password are (blank) (DeutscheTelekom example)
and the DCP is configured to be used with the Avire Hub, then the text message will be:
Pin1234,P060 (blank),P063 1
If everything is configured correctly, you will receive a text within a few minutes:
P063
0
1
2
3
Type
Transparent Gateway
Avire Hub
P100
P100 + Avire Hub
