15
13
Ext. mic
External microphone connector
14
Ext. LED
External pictograms connector
15
LED selector
Selector for 12V or 24V external LEDs
used (defualt 12V)
16
Prog. DAU
Required for debugging (only for Avire
Technical support)
17
DAU configuration
See DAU configurations
18
Trace DAU
Local programming (only for Avire
Technical support)
*Must be connected, the battery will charge automatically when connected to mains
power supply.
**Only for contacts without voltage. Place an intermediate relay if any button has
voltage.
***Internal microphone connected at factory, only reconnect if accidently disconnected.
Notes:
End of Alarm (EOA): This indicates that the emergency lift trapping rescue is complete,
and the alarm can be turned off or reset.
Alarm Filter: The cabin alarm button will not activate unless the lift is in a fault condition
or the doors are closed, this filter is mostly used to prevent nuisance calls.
Intercom alarm: This allows 2-way voice communication between the top of car and
the machine room handset connected to the DCP.
Cabin alarm button: this is the main alarm button in the car operating panel which
needs a voltage free contact from the alarm push to trigger an emergency alarm call.