8
Input the new password again then press
【
ENTER
】
. There will be a 1-sec beep sound once the setup is complete.
Press
【
ESC
】
twice (2) to exit password setup page and return to the normal working mode.
5.2.2 Restore factory settings
Press and hold
【
SETUP
】
for 3 seconds (under normal working mode), then follow the steps below:
Press
【
ENTER
】
to confirm. There will be a 1-sec beep sound once the setup is complete.
Press
【
ESC
】
twice (2) to exit password setup page and return to the normal working mode.
5.3 Keyboard menu
PTZ Setup
Camera address: 0-255
(to be set)
Protocol
PELCO-D, PELCO-P, VISACA
Baud Rate
2400/ 4800/ 9600/ 19200
Camera address
：
0-255
(uniform settings for all
devices)
Same as above
SYSTEM Setup
SET PASSWORD
OLD PW
：
old password 4 digits
NEW PW: new
password
4 digits
AGAIN PW: confirm
change
4 digits
LOAD DEFAU
(Restore factory setting)
Confirm?
Press
【
ENTER
】
to confirm
Press
【
ESC
】
to exit
SYSTEM Setup
SOUND SETUP
(Button sound on/off)
ON
Move joystick right/left to select
Press
【
ENTER
】
to confirm
OFF
HOST ID SET
Keyboard address
Number
【
0
】
-
【
15
】
LEARN SETUP
(Keyboard lock setting)
ON
Move joystick right/left to select
Press
【
ENTER
】
to confirm
OFF
Enter password
Move joystick downward
【
Enter
】
Move joystick downward
【
Enter
】
