Avipas AV-1071, User Manual

Page: 12 / 32

12
manually, press [MANUAL]. Adjust focus with
[Far] (focus on far object) or [NEAR] (focus on
near object).
10. Camera Select Buttons
Press the button corresponding to the camera
being operated with the remote control.
11. # Button
For use with other buttons.
12. Camera IR Address Setup Buttons
[*]+[
＃
]+[F1]: Address1
[*]+[
＃
]+[F2]: Address2
[*]+[
＃
]+[F3]: Address3
[*]+[
＃
]+[F4]: Address4
13. Clear Preset Buttons
Clear preset: erase a preset position.
[CLEAR PRESET] + Numeric button (0-9)
individually.
Or: [*]+[#]+[CLEAR PRESET]: erase all the
preset positions.
14. Pan/Tilt Control Buttons
Press arrow buttons to perform panning and tilting.
Press [HOME] to reposition the camera back to
front.
15. Menu
Menu: enter or exit OSD MENU.
16. BLC (BackLight Compensation) Button
BLC ON/OFF: press this button to enable the
backlight compensation. Press it again to disable
the backlight compensation. (NOTE: effective
only in auto exposure mode) .
Note: if there is a light source behind the subject,
the subject will become dark. In this case, press
the backlight ON/OFF button to adjust.
17. Pan/Tilt Reset
Preset Pan/Tilt self-test.
18. Image Freezing Function
Manually Freeze : enable the freezing function by
pressing [F4] on the remote control. "Freeze" will
display on the upper left corner of the screen, and
will disappear automatically after 5 seconds. Press
[F4] again to return to normal mode. "Unfreeze"
will display on the upper left corner of the screen,
and will disappear automatically after 5 seconds.
Recall Preset Image Freeze
：
use "Recalling
Preset Image Freeze" function in the OSD Menu.
After the function is activated, the screen pauses.
It can then be switched to any preset position by
pressing the corresponding number.
19. Shortcut Setup
[*]+[
＃
]+[1]: OSD menu default English
[*]+[
＃
]+[3]: OSD menu default Chinese
[*]+[
＃
]+[4]: Default IP address
[*]+[
＃
]+[5]: Save OSD
[*]+[
＃
]+[6]: Quick default reset
[*]+[
＃
]+[8]: Look up camera version
[*]+[
＃
]+[9]: Quick inversion setup