35
Move the cursor to the Noise Reduction item in
the main menu and press [home] button, NOISE
REDUCTION menu appears, as shown in the
following figure.
NR2D-Level:2D noise reduction. Optional items:
Off,Auto,1 ~ 5
NR3D-Level:3D noise reduction. Optional items:
Off,1 ~ 8
D-HotPixel:
Dynamic bad points
, Optional items:
Off,1 ~ 5
7. SETUP
Move the cursor to the Setup item in the main
menu and press [home] button, SETUP menu
appears, as shown in the following figure.
Language: menu language, Optional
Items: English, Chinese
Protocol: Control protocol type.
Optional items: AUTO, VISCA, PELCO-D,
PELCO-P
V_Address: Protocol address, To be decided
according to the agreement, AUTO, VISCA protocol
Optional items: 1 ~ 7
P_D_Address: PELCO-D protocol Optional items: 0
~ 254
P_P_Address: PELCO-P protocol Optional items: 0
~ 31
V_AddrFix: If I can change through the serial port
of infrared switch, Optional items: On, Off(When set
to On, useless in 88 30 01 FF Command)
SETUP
Language
EN
Protocol
VISCA
V_Address
1
V_AddrFix
Off
Net Mode
Serial
Baudrate
9600
Select Item
Change Value
[Menu] Back
NOISE REDUCTION
NR2D-Level 3
NR3D-Level 3
D-HotPixel
Off
Select Item
Change Value
[Menu] Back
