IP POWER 9258 USER MANUAL
- 22 -
F. IP Service
IP Server gives the user the ability to easily search for the name of the device other than
searching for a long IP number. This flexibility allows the user to easily just remember the name
of their device so they can access it with ease.
To Enable IP Server:
Go to
IPSrv Conf
on the Left hand side of the Webpage and then make sure you have
IPSrv
On/Off
on
On
. The default IP server IP Address is
220.135.169.136
and provided.
The user can also setup his/her own IP Server system and use their own address as well.
By setting the server address in IP server of advanced setup page, the user can easily search for
his/her IP Power 9258-1U on internet just by searching for the name of the device. The
default
IP address of IP server is 220.135.169.136.
Step1: Click the green
“connect” button
Step2: In the device name section: Type in the name of your device (Min of 3 letters)
