IP POWER 9258 USER MANUAL
- 20 -
C. EMAIL SETUP
:
When you finished the e-mail setup , you can set to let IP Power 9258 send its IP address
automatically.
To send out mail successfully , please do set the DNS correctly . You can check with your ISP
for correct DNS information.
For example:
* Smtp Server : smtp.sample.com
* Smtp Port: 25
* Pop3Server: pop3.sample.com
* Username : sample
* Password: *********** ( do not over 8 digits)
* Sender: [email protected]
* Receiver 1: [email protected]
* Receiver 2: [email protected]
* Receiver 3: [email protected]
* Subject: This is the subject line
* Message : This is the body of the email
-
SmtpSever = Mail Server
: Outgoing Mail Server . Please make sure the server is an
available mail server.
-
SmtpPort
: We suggest to keep port as 25
-
Pop3Server
: Incoming Mail Server. IP address ( in Internet WAN ) from your ISP
for sending Internet IP address by E-mail when 9258 in Internet.To receive IP address in WAN ,
please fill your ISP e-mail receive server.
-
Username :
please use the name format that the email server inquire ( if need the
username with words after @ )
-
Password
: the password of this mailbox is
no longer than 8 characters
.
-
Sender
: please fill in the name of sender. The Mail Server must support SMTP and these fields
must be filled in correctly.
