IP POWER 9258-1U USER MANUAL
IP address Settings
: Ethernet (LAN) and Internet(WAN)
Local Area Network (LAN) :
In LAN, you can set a fixed IP address or gain it from a DHCP server automatically. We recommend you use a
fixed IP address so you can access the 9258-1U through the internet.
Now type the new IP address in the address field of IE, you can visit the 9258-1U. You also can use the
ipedit.exe to find the IP Power 9258-1U and modify its IP address.
Work on Internet (WAN):
User can set the IP provided by your ISP. If the IP Power 9258-1U has a public IP address,
you can control it through the Internet. IP Sensor 9258-1U supports fixed IP, DHCP.
*
IP Address
: Please type in the IP address provided by your ISP. If IP Power 9258-1U.
*
Subnet Mask
: please type in the Subnet Mask provided by your ISP. If IP Power 9258-1U is working with a
Router, please refer to the network settings of the Router.
*
Default gateway
: please type in the Default Gateway provided by your ISP. If IP Power 9258-1U is working
with a Router, please refer to the network settings of the Router.
*
DNS Server
: please fill in the IP address of DNS server. If you are in Taiwan, you can set it to 168.95.1.1.
*
DHCP Clients
: Enable– activate DHCP service. DHCP will assign IP address for each PC.
Disable – shut down the DHCP service. You can set the IP address by yourself.
*
Beeper
: Enable – activate the sound beeper .
Disable – turn off the sound beeper.
If you control the 9258-1U through the web page, the beeper will beep once when the
operation works.
Reminder:
*IP address format
: XXX.XXX.XXX.XXX:YYYY YYYY means the port number,
(I.E 192.168.1.100:2345)
Port ranges from: 1 to 32767
.
*Subnet Mask
: Ranges from 0 to 254 (xxx.xxx.xxx.0 ~ xxx.xxx.xxx.254 )
*If
DHCP is disabled
, then the user must set the
TCP Port
and
default Gateway
.If
DHCP is
enabled
, then the TCP port will be preset to 80( xxx.xxx.xxx.xxx:80 ) and the default gateway will
be set by the DHCP server.
Http Command Verification
: Setup the control possibility from HTTP command or SDK (VB & VC)
1. Select
Base64
: To enable HTTP command & SDK control
2. Select
Cookie
: To disable HTTP command & SDK control
2.) DDNS Settings
Please refer to page 23 for more details
3. EMAIL SETTINGS
:
When you finished the e-mail settings, you can set to let IP Power 9258-1U send its IP address automatically.
VER1.50
- 17 -
