IP POWER 1U USER MANUAL
(Figure 1.2 IPEdit)
IPEDIT will search and display all IP Products 9XXX series under the same local Ethernet. The default name
for the IP Power 9258-1U is “
IP9258”
Please refer to (Fig. 1.2 above).
1. Double click and highlight your IP Power 9258-1U device. The default device name and IP/Network settings
will all be displayed on the right hand side of IPEdit.
Make sure that the IP Address of your 9258-1U is setup on the same subnet network as your PC’s
(Subnet mask, Gateway)
*
Represents that your 9258-1U does not match the gateway of your router
.
(E.g. If the Default Gateway of your computer is 192.168.1.1 The IP Address of your 9258-1U will need to be
set up to 192.168.1.XXX.)
2a.
Automatically Detect Network settings
(Please go to 2b. for steps on how to manually enter network
settings)
a.) Click on the REF button to the right of IPEdit
b.) Please wait a few seconds while IPEdit detects your network settings. Then click the Apply button to apply
the new network settings
- 10 -
