E-25
When 90-deg rotation is chosen
Regular Operation
This section describes the use of direct operation using the projector and remote control buttons.
Please see the items on Page E-36 “Method of Menu Operation” and Page E-38 “Menu Description” for information
about operation using the menu.
Select the Input
Operation with the Projector
Select the input using the INPUT buttons.
The input switches in the order OHP
→
PC
→
VID-
EO or OHP
→
VIDEO (
Component
)
→
VIDEO each
time the button is pressed.
Operation with the Remote Control
Select the input using the INPUT buttons.
When the projector’s power is turned on, one of the input selection icons ([OHP, PC or VIDEO] or [OHP, VIDEO
(Component) or VIDEO]) is displayed.
(When the PC input is set to RGB)
(When the PC input is set to component)
* For instructions on selecting the PC input, see page E-38.
NOTE:
• The input mode at starting time will be the same as it was the last time the projector was switched off.
• When the icon is displayed, either the left or right key permits input switching.
Changing the Orientation of the Projection Image
Effective Only with OHP Input
This changes the orientation of the currently projected image to 0° and to 90°. The changed video is displayed ac-
cording to the lateral axis of the screen. Also, a mode for rotating the projected image 360° in 90° steps can be se-
lected from the menu screen.
Operation with the Projector
Press the PORTRAIT button.
Operation with the Remote Control
Press the ROTATION button.
• When the PORTRAIT or ROTATION button is pressed, the rotation selection
icons appear. Select the desired orientation. The icon display turns off when the
image switches.
OHP
PC
VIDEO
OHP
VIDEO
（
Component
）
VIDEO
ON/STANDBY
LAMP/COVER
TEMP
FREEZE OFF FREEZE
/CAPTURE
PORTRAIT
INPUT
ON/STANDBY
LAMP/COVER
TEMP
FREEZE OFF FREEZE
/CAPTURE
INPUT
PORTRAIT
Green frame (current display position)
(vertical/horizontal rotation mode)
(360° rotation mode)
Green frame (current display posi-
tion)
Green frame (selected position)