E-18
CAUTION
Connection Precautions
• To protect this projector and the equipment to be connected, switch off the power of each unit before
making connections.
• Please read the various equipment instruction manuals for information about the connection of the
equipment and the method of use.
• When connection is made with a notebook computer and the image is displayed on the LCD screen of
the notebook computer, a proper display might not be obtained on projection screen. Switching off the
display of the notebook computer will result in a proper display. The method of switching off the display
of the notebook computer will differ depending on the PC manufacturer. Please read the instruction
manual of the notebook computer for details.
• Connection might not be possibly depending on the model and settings of the personal computer.
Please contact your dealer of purchase for further information.
• The image of the PC cannot be projected while the USB cable is connected. Connect the PC connec-
tion cable.
Connections with the Personal Computer
Basic Connections
Connections with Personal Computers
NOTE:
• After connecting the PC connection cable, set the external output and the computer’s screen display settings on the computer.
• When the settings of the external output have not been made, "No signal being input" will be displayed.
• When a condition in which a signal has not been input continues for 15 minutes or longer, the lamp is turned off automatically.
(This only functions when the auto power off mode is set to “ON”. See page E-43.)
To the RGB out-
put connector
of the personal
computer
To the audio output
connector of the
personal computer
Plug in the connection cable
and fasten with the screws
NOTE:
• Input Connectors
→
See Page E-10.
PC connection cable (Supplied item)*
Stereo mini plug - to - RCA audio cable
(Commercially available)
