Avintage AVU53TDZA, Use Instruction

Page: 45 / 156

45
Press “ ” to set the upper chamber temperature.. The relevant chamber display will start to flash
and each press on the button will alter the temperature by 1°C. Once the lowest set temperature of 10°C
is reached, the display automatically changes to the highest set temperature of 20°C. Once selected, the
display will flash for approximately 5s before showing the current internal temperature of the cellar. The
set temperature can be viewed at any time by pressing and holding the temperature select buttons for 5s.
In the event of a power cut, all previously selected temperature settings will be deleted and each chamber
will re-initialize to the factory-preset temperature of 6°C for the upper chamber and 12°C for the lower
chamber.
When the surrounding temperature is 25
℃
and the wine cooler has no bottle loaded, it will take
around 30 minutes to increase the wine cooler’s temperature from 5
℃
to 12
℃
. Under the same
circumstance, it will take around 30 minutes to decrease the wine cooler’s temperature from 12
℃
to 5
℃
. The less the temperature span is, the less time it will take. The setting temperature of upper
zone should be lower than the setting temperature of lower zone
Function instruction
•
Temperature alarm:
If inner temperature is higher than 23°C after running 10 hours with power, the “HI” is shown in display
panel, and the buzzer alarm after one hour continuously. It informs that the inner temperature is too
high, please check the reason. If inner temperature is lower than 0°C, the “LO” is shown in display
panel, and the buzzer alarm too will sound.
•
Temperature recollection function:
In the event of a power interruption, wine cabinet will remember the previous temperature settings and
when the power is recovered, the cabinet temperature will go back the same setting temperature as
power off.
Internal light
In order to reduce energy consumption, this wine cabinet will automatically switch off the LED lights after
10 minutes.
If you want the LED light to remain on continuously, this is possible. Please press and hold the
button for 5 seconds, the display will show "LP". After 4 seconds the display will revert back to normal,
and the light will remain on until manually switched off.
If you want to revert back and conserve energy (recommended), please press and hold the button for
5 seconds, the display will show "LF". After 4 seconds the display will revert back to normal, and the light
will automatically switch off after 10 minutes.
5. EQUIPMENT
The climate control system
According to advice from specialists, the ideal temperature for storing wine is around 12°C, within a
bracket of 10 to 14°C. Do not confuse this with service temperature, which varies between 5 and 20°C,
depending on the specific nature of the wine.
It is especially important to avoid sudden changes in temperature. Designed by specialists for oenophiles,
this appliance, unlike a simple refrigerator, takes into account the sensitivity of grand cru wines to sudden
variations in temperature by ensuring the close control of a
constant average temperature .