Squeeze Mop & Bucket Set
Parts List:
3 x Metal pole
1 x Top Handle
1 x Pad Base
2 x Cleaning Pads
1 x Bucket
Easy Two-step Assembly:
Step 1: Starting with the Top handle, screw the bottom of each rod
into the top (grey connector) of the next rod until all four parts
have been connected.
Step 2: Insert the end of the assembled mop into the connector on
the back of the mop head and push firmly until it clicks into place.
Once connected, the mop head will be able to pivot 180 degrees as
shown below.
The mop is now fully assembled and the Bucket arrives ready for use. Nothing more required.
