Wheel
4
Rear Wheel
Large
washer
Large spacer
Wheel cover
Nut
Small
washer
Hub cap
1
Slide a large washer and large spacer onto the axle as shown.
Note:
On the motor side simply slide the wheel onto the axle
and align the gear so it fits into the pocket. No washer or
spacer is needed.
2
Locate a wheel marked
rear.
Slide the wheel onto the axle
with the word
rear
facing in, toward the vehicle.
3
Align the four posts on the back of the wheel cover with the
holes in the wheel and slide the wheel cover into the wheel.
4
Align the pins in the hubcap with the holes in the wheel cover
and press in place
Note:
Do not use a hammer. Repeat steps 1-5 to attach both
rear wheels.
1
2
3
4
5
5
Slide a small washer and then the nut onto the axle. Tighten
the nut until you can see about two threads on the axle. Do
not overtighten.
