12
Remote Operation
1
On the vehicle, switch the manual/remote switch to remote.
2
Turn the vehicle power switch
On.
Remote Control Buttons
3
Turn the remote power switch
on
(the Power LED should be red)
4
Move the vehicle coding switch (located in the battery
compartment) the so it matches the coding switch on the remote
control.
5
Enter the password for the remote (default password is 1234).
The Setting LED should light up according to each press of the
numeric keys.
Note:
to reset the password, see Maintenance: Reset the
Remote Password See page 17.
6
Press the Enter (E) key to con
fi
rm the password. The Setting
LED will stay green if the password is entered correctly,
otherwise it will be
fl
ashing red. Repeat steps 5 & 6 if necessary.
Remote will power
Off
after 1 minute of idle use. Turn the remote
Off
and
On
again to format.
7
Test the connection from the remote to the vehicle, see
Troubleshooting for problem resolution.
8
Operate the vehicle.
9
If necessary, press “C” button to activate the emergency stop.
Then turn the remote
Off
and
On
again to operate. The 4 digit
code must be re-entered.
Forward/Reverse
Left/Right
Emergency stop
Enter key (E)
Password keys (1-4)
On/Off
switch
Remote Control should only be used by an adult who
has read and understands the instructions of this manual.
A
A
B
B
C
C
D
D
E
E
F
F
