Avigilon CBS350-24FP-4G Series, User Manual, Page: 11 / 17

The VLAN Configuration Wizard will assist you in configuring the VLANs. Each time you run this wizard, you
can configure the port memberships in a single VLAN.
1. In Configuration Wizards > VLAN Configuration Wizard , click Launch Wizard .
2. Click Launch Wizard and Next .
3. Select the ports that are to be configured as trunk ports (by clicking with mouse on the required ports
in the graphical display). Ports that are already configured as Trunk ports are pre-selected.
4. Click Next .
5. Enter the fields:
l
VLAN ID — Select the VLAN you want to configure. You can select either an existing VLAN or
New VLAN.
n
New VLAN ID — Enter the VLAN ID of a new VLAN.
n
VLAN Name — Optionally, enter VLAN name.
6. Select the trunk ports that are to be configured as untagged members of the VLAN (by clicking with
mouse on the required ports in the graphical display). The trunk ports that are not selected in this step
become tagged members of the VLAN.
7. Click Next.
8. Select the ports that are to be the access ports of the VLAN. Access ports of a VLAN are untagged
members of the VLAN. (by clicking with mouse on the required ports in the graphical display).
9. Click Next to see the summary of the information that you entered.
10. Click Apply .
ACL Configuration Wizard
An access control list (ACL) is an ordered list of rules used to filter network traffic. Using ACLs helps to
increase security, reliability, and efficiency of a network. Each rule states what traffic is permitted or what's
denied. When a packet attempts to enter or leave the managed PoE switch, it's tested against each rule in the
list — from first to last. If the packet matches a rule, its outcome is determined by the conditions of the
statement: If the first rule the packet matches is a permit statement, it's permitted; if it's a deny statement, it's
denied.
The ACL Configuration Wizard will assist you when creating a new ACL, or editing an existing ACL. To add or
modify an existing ACL, complete the following steps:
1. In Configuration Wizards > ACL Configuration Wizard , click Launch Wizard .
2. To create a new ACL, click Next . To edit an existing ACL, choose it from the ACL drop-down list and
then click Next .
3. Enter the fields:
l
ACL Name — Enter the name of a new ACL.
l
ACL Type — Select the type of ACL: IPv4 or MAC.
4. Click Next.
5. Enter the fields:
ACL Configuration Wizard 8