Avigilon 1.0W-H3PTZ-DP20 Page 25 Web Interface User Manual Download

Page: 25 / 28

The

All Heads

tab is only displayed on the Image and Display page. The Image and Display page allows you to

change settings that apply to the whole camera and settings that can apply to specific camera heads.

1. Select the All Heads tab to adjust the settings that apply to the whole camera. These settings include

Flicker Control, WDR, Saturation, Brightness, Sharpness and Contrast.

2. In the All Heads tab, you can set the

Imaging mode

to Global or Per-head:

Global

— apply the same settings to all camera heads. Use the settings listed in the All Heads tab

to adjust the camera image settings. The same settings for each numbered tab is disabled.

Per-head

— apply different settings to each camera head. Select the different tabs to change the

settings for each camera head.

3. Select each numbered tab to adjust the zoom and focus controls for each camera head. These settings

must be manually adjusted for each camera head.

For more information about the different Image and Display settings, see

Image and Display

on page 8.

Changing Settings Per Camera Head

Summary of Contents for 1.0W-H3PTZ-DP20





























Search results

Summary of Contents for 1.0W-H3PTZ-DP20

Reviews:

Related manuals for 1.0W-H3PTZ-DP20

Brands by name

Popular brands

Avigilon 1.0W-H3PTZ-DP20, Web Interface User Manual

Search results

Summary of Contents for 1.0W-H3PTZ-DP20

Reviews:

Related manuals for 1.0W-H3PTZ-DP20

Brands by name

Popular brands