HD Multisensor Dome Camera
Avigilon™ HD Multisensor Dome Cameras use the same settings as the other cameras, except these settings are
multiplied by the number of heads on the camera. You can configure each head on the camera individually.
When you see the camera's video display, you will see either three or four image panels displayed — one for
each head on the dome camera:
The top left image panel is always for Head 1. The odd numbered heads are displayed on the left, and the even
numbered heads are displayed on the right.
To control the video display:
l
Click on an image panel then use the zoom and focus controls to adjust the video image.
l
Move your mouse into the image panel then click
to maximize the image panel. Click
to restore the
image panel.
Changing Settings Per Camera Head
When you adjust the video image settings, you will typically see a tab for each camera head:
Head 1 is on the far left and the following heads are displayed in tabs to the right. To change settings for a
specific camera head, select that tab on the settings page and make the required changes.
If no tabs are displayed, the settings apply to the camera as a whole.
20
HD Multisensor Dome Camera
