Avigilon 1.0MP-HD-H264-B1, Installation Manual, Page: 2 / 21

i
Important Safety Information
This manual provides installation and operation information and precautions for the use
of this equipment. Incorrect installation could cause an unexpected fault. Before
installing this equipment read this manual carefully. Please provide this manual to the
owner of the equipment for future use.
• Do not use the camera near water or expose the camera to dripping or
splashing. Do not place objects filled with liquids, above the camera.
• Do not expose the camera to rain or moisture.
• This camera is designed for indoor use only.
If used outdoors, the camera must be installed in an appropriate enclosure.
Consult with Avigilon for more information.
• Installation of this camera must be performed by qualified personnel only
and conform to all local codes.
• This product is intended to be supplied by a UL Listed Power Unit marked
“Class 2” or “LPS” or “Limited Power Source” with output rated between
12 VDC or 24 VAC, 6 W min. or Power over Ethernet (PoE), rated 48 VDC,
6 W min.
• Any external power supply connected to the camera may only be connected
to another Avigilon camera of the same model series. External power
connections must be properly insulated.
• Do not connect the camera directly to mains power for any reason.
The Warning symbol indicates the presence of dangerous voltage
within and outside the product enclosure that may constitute a risk of
electric shock, serious injury or death to persons if proper precautions
are not followed.
The Caution symbol alerts the user to the presence of hazards that may
cause minor or moderate injury to persons, damage to property or
damage to the camera itself if proper precautions are not followed.
Warning — Failure to observe the following instructions may result in severe
injury or death.