Avigilon 1.0MP-HD-H264-B1, Installation Manual, Page: 10 / 21

4
Mounting the Camera
The camera can be mounted on brackets, in enclosures, or on tripods. The camera
mounting points on the top and bottom of the camera body each have a 1/4”-20 UNC
threaded hole which allow the camera to be mounted with standard photographic
mounting bolts.
Consult the bracket, enclosure or tripod documentation for detailed mounting
instructions.
Connecting Cables
Refer to the camera diagrams in the Overview section for the location of the different
connectors.
To connect the cables required for proper camera operation, complete the following:
1. If there are external input or output devices that need to be connected to the
camera (for example: door contacts, relays, etc), connect the devices to the
camera I/O Terminals.
For more information, see
Connecting to Input/Output Devices in the Cable
Connections section.
2. If an external microphone or external video monitor needs to be connected
to the camera, connect the devices to the camera Audio/Video Connector.
For more information, see
Connecting to Microphones and Video Monitors
in the Cable Connections section.
3. Connect the Ethernet Port (RJ45 connector) to a network using an Ethernet
network cable. The Link LED will turn on once the camera establishes a link
to the network.
4. Connect power using one of the following methods:
• Power over Ethernet (PoE) Class 3 — If PoE is available, the camera
will automatically be detected when the network cable is connected.
Warning — Use only UL-listed mounting bracket suitable for the mounting
surface and minimum 0.7 kg (1.5 lb) weight.
Caution — This camera is designed for indoor use only.