Avigilon 1.0-H3M-DO1, Installation Manual

Page: 14 / 138

6
English
b. If you are not, use pliers to pull off the tab covering
the back cable notch. Tuck the cable under the
notch when you mount the camera.
The camera is completely sealed, so the cable notch can
be placed in any direction as long as the camera is aimed
in the right direction.
Assigning an IP Address
The camera automatically obtains an IP address by default. Once
connected to a network, it attempts to locate and obtain an IP address
from a DHCP server. If this fails, Zero Configuration Networking
(Zeroconf) is used to choose an IP address. When the IP address is
set using Zeroconf, the IP address is in the 169.254.0.0/16 subnet.
The IP address settings can be changed using one of the following
methods:
• Avigilon Camera Installation Tool software application.
• Camera's web browser interface:
http://
<camera IP address>
/
• ARP/Ping method. For more information, see Setting the
IP Address through the ARP/Ping Method .
• Network Video Management software application (for
example, Avigilon Control Center).
Cable notch