3
11
1
2
TAB
Selecting a Visual Approach
To select a Visual
Approach for your
destination airport ,
press the “PROC” Function
key.* This will display a
dropdown list of available
published approaches.
To select the desired
Visual Approach,
twist
the FMS knob to scroll
down past any published
IFR approaches to see
the available Visual
Approaches, then push
to select, or tap the
highlighted selection.
Then select the Visual
Entry,
(Straight In,
Left Base, Right Base,
Left Downwind, Right
Downwind)
that
works best for your
direction of flight and
approach angle.
Go to Aux->Setup->FMS->Visual Approach Settings
to set the
desired Glideslope Angle. The default setting is 4° but it can be
set to any angle between 1° and 6° in 0.1° increments. Glideslope
must be set to desired angle BEFORE loading the Visual Approach.
Remember you are still flying a VFR approach and proper clearance
and separation must be observed for the terrain in the area.
Summary of Contents for IFD100
Page 29: ...NOTES 29 ...
