Avidyne AMX240 Pilot'S Manual Download Page 31

Page: 31 / 32

Website

There is a website that provides more information on this

product at

http://www.avidyne.com/products/amx240/index.asp

Service Hotline

A hotline has been established to service

questions or issues regarding Avidyne products. The U.S. Toll
Free number is 1-888-723-7592. International toll free numbers
are listed at

http://www.avidyne.com/contact/intphones.asp

Email

Customer/product support issues can be emailed as well

•

Europe –

[email protected]

•

Australia & Asia –

[email protected]

•

Everywhere else should email

[email protected]

When calling or emailing for product-related help, please have the
following information available, if able:

□

Customer Name/Account Information

□

Aircraft tail number

□

AMX240 serial number, and software versions, if known

□

A good description of the problem or question.

SOFTWARE LICENSE:

AVIDYNE CORPORATION (“AVIDYNE”) IS WILLING TO LICENSE

THIS SOFTWARE, PILOT’S GUIDE, AND RELATED MATERIALS (THE “SOFTWARE”)
ONLY ON THE CONDITION THAT YOU AGREE TO THE TERMS OF THE PUBLISHED
SOFTWARE LICENSE WHICH CAN BE ACCESSED VIA THIS WEB ADDRESS:

HTTP://WWW.AVIDYNE.COM/SUPPORT/LICENSE.ASP

Summary of Contents for AMX240

































Search results

Summary of Contents for AMX240

Reviews:

Related manuals for AMX240

Brands by name

Popular brands

Avidyne AMX240, Pilot'S Manual

Search results

Summary of Contents for AMX240

Reviews:

Related manuals for AMX240

Brands by name

Popular brands