Avidsen IPC380-i, Manual

Page: 33 / 160

13
EN EN
d - CONFiGurATiON
Indoor rotatIng 720P IP WIFI camera
6
Video quality settings and number of frames
per second.
warning: if you set the video quality to high
with respect to the quality of the internet
connection of your camera and smartphone
or tablet, you may experience choppy video
or loss of connection.
Two streams can be adjusted: they
correspond to the maximum resolution
= "résolution Max", and low resolution =
"résolution faible", which you can select from
the live video display.
Warning: in some cases, a change in camera
resolution will only happen when the app is
restarted. Exit and re-launch the Aviwatch
app if there is a problem.
7
Confi gure the camera's current WiFi settings
8
If a micro SD card has been inserted into the
camera, you can reformat it and display its
total and free memory
9
Setting the date and time stamps on the
camera's video
10
Settings for sending emails in the event of an
alert (see the example below)
11
Settings for saving to an FTP server
12
Restarting the camera remotely/Update/
Reset
13
Camera network information
2.2 - Example: programming an email alert to
be sent when movement is detected
To program an alert to be sent when movement
is detected, you need 2 email addresses: the
address of the sender which will be used by
the camera, and the address which will receive
the alerts. The camera uses the username and
password of the sender address to connect and
send the email. Confi guration depends on the
chosen email provider's settings.
Note:
the 2 email addresses can be the same
(you will simply be sending an email to yourself).
In our example, we use
www.gmail.com : sender-address@gmail.
com sends the alerts, recipient@gmail.com
receives the alerts. Both addresses need to have
been created beforehand.
First, go to “
Réglages Email ” (Email settings):
1
11
2
3
4
5
6
7
8
9
10
iOS
1
2
3
4
5
6
7
8
9
10
11
Android
1
Email: Name that you should enter to log in
to the email box which will send the alerts. In
our example using Gmail, this is the sender
address:
sender-address@gmail.com