Copyright 2004
©
Avid Identification Systems, Inc.
4
MT1_Manual_0310.doc 8/24/2011
4.
Battery
The reader is powered by one 9volt battery. An alkaline battery is recommended
for a longer battery life. The battery is located in the battery compartment on the
lower backside of the reader. To replace the battery, slide the cover straight off.
To secure it, slide the cover back to its’ original position making sure the wires are
securely inside the compartment.
WARNING: FOLLOW BATTERY INSTRUCTIONS FOR DISPOSAL.
Operating the Reader Near Metal
Metal objects (especially ferrous metals) absorb electromagnetic fields. Operating
the reader antenna or placing the chip too close to metal object can severely limit the
range of operation of the system. If you are experiencing reduced operating range
of your system, check for metal tabletops, doors, etc. in proximity (a few inches) to
any part of the chip/reader environment.
Warranty and Service
The Avid Mini-Tracker Reader is warranted against defects in material and
workmanship, under normal use and service, for a period of 1 year from the date of
shipment from AVID. This warranty will not apply if repairs, parts or adjustments are
required due to accident, neglect, damage during transportation, or causes other
than ordinary use. AVID’s sole responsibility under this warranty shall be, at AVID’s
option, to either repair or replace any product, which fails during the warranty period.
In no event shall AVID be liable for any indirect or consequential damages or loss of
profits.
A
Return Material Authorization (RMA)
number must be issued before a unit is
returned to AVID for service. Contact AVID for a
RMA
number or other service
questions.
(951) 371-7505
.
