Copyright 2004
©
Avid Identification Systems, Inc.
2
MT1_Manual_0310.doc 8/24/2011
Introduction
Congratulations on the purchase of your new
AVID Mini-Tracker Reader
. This
reader is capable of reading
AVID
and some other brands of electronic identification
tags using the
FECAVA
protocol.
Instructions
1.
Power Button
Turn the reader ON by sliding the lower right hand button on the face of the
reader, forward. When the reader is powered on, it will emit a double beep sound
and the LCD will display
AVID ID READY
. To turn the reader OFF, slide the
button back.
2.
Read Button
Press the upper right button on the reader or the red button on the wand handle to
put the reader into the
LOOKING
mode. The LCD will display
LOOKING
. When
a microchip is found, the reader will emit two beep tones and display the number
on the LCD. If the
Read
button is released before finding a microchip, the
message
NO ID FOUND
will display on the LCD.
3.
Reading
The reader antenna is located inside the reader at the top. The bottom of the
reader has a label marked “
READ HERE
” which identifies the antenna area. While
pressing down the
Read
button, scan in a circular pattern while moving toward the
head, starting from the middle of the back.
READ
OFF
ON
B
a
tt
e
ry
C
o
m
p
a
rt
m
e
n
t
Read
Button
Power
Switch
AVID*123*456*789
A
n
te
n
n
a
R
e
a
d
e
r
