SET UP INSTRUCTIONS
THE SUPPLIED PACKAGING IS VITAL FOR PROTECTION AND SHIPPING.
IT SHOULD BE RETAINED AND REPLACEMENT PACKAGING IS COSTLY.
PACKAGING.
•
ON OPENING THE BOX YOU WILL SEE THE POWER SUPPLY,
CLAMP AND BEARING. IT MAY OR MAY NOT HAVE AN ARM
FITTED.
•
REFER BACK TO THIS MANUAL SHOULD YOU NEED TO REPACK.
•
LIFT OUT TOP LAYER USING THE HAND HOLES.
•
THE MOTOR AND POWER SUPPLY SHOULD BE REMOVED FROM
THE PACKAGING FIRST, COMPLETE WITH ITS FOAM PACKAGING.
DO NOT PULL THE MOTOR OUT BY ITS SUPPLY LEAD.
•
LIFT THE TURNTABLE BASE OUT WITH THE PACKAGING USING
THE HAND HOLES.
•
THE PLATTER IS LOCATED IN THE BASE LAYER.
•
REMOVE THE PACKAGING FROM THE MAIN BASE CHASSIS.
•
YOU MUST CLEAN THE TOP OF THE BEARING SPINDLE NOW AND
ENSURE IT’S ALWAYS KEPT CLEAN - INSERT SOFT TISSUE INTO
TOP OF SPINDLE AND TWIST TO CLEAN.
•
PLACE THE BEARING BALL INTO TOP OF SPINDLE.
DO NOT USE ADHESIVE OR ADD LUBRICATION TO THIS AREA.
•
FIT THE BEARING ONTO THE SPINDLE.
•
CAREFUL – DO NOT DROP ONTO SPINDLE AS YOU MAY DAMAGE
THE SAPPHIRE. THERE IS A PRESSURE RELEASE HOLE IN THE
TOP OF THE BEARING SO IT MAY FIT DOWN QUICKER THAN YOU
EXPECT.
•
SPIN THE BEARING TO MAKE SURE IT’S RUNNING OK.
