VENUE D-Show Sidecar
8
5
Using the small flat head screwdriver, carefully lift the pan-
els from each unit.
6
Carefully disconnect the cables leading to each top panel,
making note of each connection so you can reconnect it later.
7
Remove each top panel from the facing side of each unit.
8
Remove the 7 internal Philips screws connecting the plastic
side cap on the facing side of each unit. There are four screws
along the length of the unit, and three in the meter bridge
area.
9
Remove the plastic side caps.
10
Move the units together and attach them from the five in-
side holes as indicated below, using the longer Philips screws
(provided). All screws are inserted from left to right (the head
of each screw should be inside the leftmost of the two units).
Do not tighten the screws.
Lifting top panel from the unit
Disconnecting cables to the top panels
Sidecar with top panels removed from right side of unit
Removing internal screws from the side caps
Location of screw holes for attaching units
Screw holes
