6
Installation Instructions
Installing the Tower-to-Rack Conversion Kit
Part 0130-05337-01 Rev. B
6. From the rear of the rack enclosure, insert a screw with teflon
washer through the slide rail and tighten the screw to the rear
mounting rail.
Figure 4
Left Rear Slide Bracket and Adjustment Screws
7. Secure the other side of the rack-shelf by repeating steps 3 to 6.
Installing the Tower-to-Rack Conversion Kit
Avid’s instructions for the Compaq Tower-to-Rack Conversion Kit
includes information on the components that Avid has added, and
excludes steps for Compaq components that are not used by Avid.
Avid systems must use the rack-shelf (see “Installing the Rack-Shelf”
on page 4). These instructions have been specifically tailored for Avid
systems.
Slide rail
Rack enclosure rear
mounting rail
Screw
Teflon washer