Avid Technology Rack-Mount Kit Installation Instructions Manual Download Page 17

Support offerings may vary per location. For the latest information, 
consult your reseller or www.avid.com.

As an Avid customer, you are entitled to access technical support 
information and product information, as well as the latest news from 
our Web-based Knowledge Center. Simply navigate to 
www.avid.com/support/onlinesupport.html, click the Knowledge 
Center link, and log in.

If you need help locating the reseller or Avid office nearest you, please 
visit our Web site at www.avid.com/products/howtobuy/index.html 
or call 800-949-AVID (2843).

Copyright and Disclaimer

Product specifications are subject to change without notice and do not represent a commitment on 
the part of Avid Technology, Inc. The software described in this document is furnished under a 
license agreement. You can obtain a copy of that license by visiting Avid’s Web site at 
www.avid.com. The terms of that license are also available in the product in the same directory as 
the software. The software may not be reverse assembled and may be used or copied only in 
accordance with the terms of the license agreement. It is against the law to copy the software on any 
medium except as specifically allowed in the license agreement. Avid products or portions thereof 
are protected by one or more of the following United States patents: 4,746,994; 4,970,663; 
5,045,940; 5,063,448; 5,077,604; 5,245,432; 5,267,351; 5,309,528; 5,325,200; 5,355,450; 
5,396,594; 5,440,348; 5,452,378; 5,467,288; 5,513,375; 5,528,310; 5,557,423; 5,568,275; 
5,577,190; 5,583,496; 5,584,006; 5,627,765; 5,634,020; 5,640,601; 5,644,364; 5,654,737; 
5,701,404; 5,715,018; 5,719,570; 5,724,605; 5,726,717; 5,729,673; 5,731,819; 5,745,637; 
5,752,029; 5,754,180; 5,754,851; 5,781,188; 5,799,150; 5,812,216; 5,828,678; 5,842,014; 
5,852,435; 5,883,670; 5,889,532; 5,892,507; 5,905,841; 5,912,675; 5,929,836; 5,929,942; 
5,930,445; 5,930,797; 5,946,445; 5,966,134; 5,977,982; 5,986,584; 5,987,501; 5,995,079; 
5,995,115; 5,999,190; 5,999,406; 6,009,507; 6,011,562; 6,014,150; 6,016,152; 6,016,380; 
6,018,337; 6,023,531; 6,023,703; 6,031,529; 6,035,367; 6,038,573; 6,052,508; 6,058,236; 
6,061,758; 6,072,796; 6,084,569; 6,091,422; 6,091,778; 6,105,083; 6,118,444; 6,128,001; 
6,128,681; 6,130,676; 6,134,379; 6,134,607; 6,137,919; 6,141,007; 6,141,691; 6,154,221; 
6,157,929; 6,160,548; 6,161,115; 6,167,404; 6,174,206; 6,192,388; 6,198,477; 6,208,357; 
6,211,869; 6,212,197; 6,215,485; 6,223,211; 6,226,005; 6,226,038; 6,229,576; 6,239,815; 
6,249,280; 6,269,195; 6,271,829; 6,301,105; 6,310,621; 6,314,403; 6,317,142; 6,317,153; 
6,317,515; D352,278; D372,478; D373,778; D392,267; D392,268; D392,269; D395,291; 
D396,853; D398,912. Additional U.S. and foreign patents pending. No part of this document may 
be reproduced or transmitted in any form or by any means, electronic or mechanical, including 
photocopying and recording, for any purpose without the express written permission of Avid 
Technology, Inc.

Copyright © 2002 Avid Technology, Inc. and its licensors. All rights reserved. Printed in USA.

Summary of Contents for Rack-Mount Kit



















Reviews: