Avid Technology Nitris, Using Manual

Page: 37 / 58

Connecting Audio and Video Equipment
37
n
Make sure you terminate the input signal if your video deck supports passthrough. See the
documentation that is provided with your video deck.
Connecting a Video Deck — Serial Digital Signal
A serial digital video deck connection requires the following:
• Two serial digital cables with BNC connectors at both ends
• A video deck with serial digital inputs and outputs
To connect a deck using serial digital signals:
1. Locate one serial digital cable.
2. Attach one end of the cable to the SDI IN on the Avid Nitris SD video I/O board or HD
SDI IN on the HD video I/O board.
Connecting a Video Deck — Digital Signal to the HD Video I/O Board
Connecting a Video Deck — Digital Signal to the SD Video I/O Board
1 2 3 4 5 6 7 8
HD SDI IN HD SDI OUT
ANALOG AUDIO IN
ANALOG IN ANALOG OUT SDI DAE LTC
SYSTEM
ANALOG AUDIO OUT
HD MONITOR OUT
MONIT
OR OUT
DIGITAL AUDIO
Y PB
S/P DIF
PR
Y SD SYNC PB PR Y
PB PR
HD TRILEVEL
SYNC
OUT 1
MIC 1 MIC 2
OUT 2
GAIN
1 2 3 4 5 6 7 8
GAIN
IN
IN
IN OUT
CV 1
CV 2
OUT
OUT 1
OUT 2 OUT 2
1
IN
IN/OUT
CV S-VIDEO
S-VIDEO
NITRIS HD
HD COMPONENT OUT
OPTICAL
AES/EBU
HD SDI IN
HD SDI OUT
To serial digital input
on video deck
To serial digital output
on video deck
1 2 3 4 5 6 7 8
HD SDI IN HD SDI OUT
ANALOG AUDIO IN
ANALOG IN
ANALOG OUT
SDI DAE LTC
SYSTEM
ANALOG AUDIO OUT
HD MONITOR OUT
MONIT
OR OUT
DIGITAL AUDIO
Y PB
S/P DIF
PR
Y
SD SYNC
PB PR Y
PB PR
HD TRILEVEL
SYNC
OUT 1
MIC 1 MIC 2
OUT 2
GAIN
1 2 3 4 5 6 7 8
GAIN
IN
IN
IN OUT
CV 1
CV 2
OUT
OUT 1
OUT 2 OUT
2
1
IN
IN/OUT
CV S-VIDEO
S-VIDEO
NITRIS HD
HD COMPONENT OUT
OPTICAL
AES/EBU
SDI IN
SDI OUT
To serial digital input
on video deck
To serial digital output
on video deck