Using the Avid Mojo DNA
10
Connecting Peripheral Equipment
There are several possible cabling configurations depending on your
camera, video deck, and client monitor. The audio and video output signals
are available to each output connector at the same time. Video and audio
cables are not included with the Avid Mojo DNA. Avid provides optional
video cables that use the S-Video and Composite video connectors for a
component connection to your deck. The following sections describe
several possible connections:
•
•
Connecting S-Video or DV Signals
•
•
Connecting a Video Deck — Component Signal
•
Connecting Audio Signals
Audio input and output connections on the rear of the Avid Mojo DNA use
standard RCA connectors. Audio connections require the following:
•
Four audio cables with RCA connectors on both ends of the cable. You
can also use audio cables with RCA connectors on one end and XLR
connectors on the other end.
•
A video deck or audio device with audio input and output connections.
Summary of Contents for Mojo DNA
Page 28: ...Using the Avid Mojo DNA 28...
