Chapter 1
Introduction
This
Guide
provides instructions for installing and operating the ConnectPlus 1000 gateway
with the Avid MediaStream Network Storage System (NSS).
A brief overview of each chapter after this introduction follows:
•
Chapter 2
describes how to connect the gateway to the VLAN, RAID Storage
subsystem, and your LAN/WAN.
•
Chapter 3
provides instructions for a system recovery, software installation, and
configuration
•
Chapter 4
describes the ConnectPlus 1000 monitoring tool.
•
Chapter 5
describes how to use the File Transfer Protocol (FTP) and provides a simple
check to verify that your system is operational.
•
Appendix A
presents IP addressing topics, such as Hosts Files and Hosts Table, aliases,
and the Avid MediaStream Systems network addressing scheme
•
Appendix B
is an overview of Avid MediaStream’s adherence to regulatory and safety
requirements.
Introduction to ConnectPlus 1000
ConnectPlus 1000 Network Storage is a gateway providing access to archive storage and to
content distribution with a set of MediaStream Servers (or nodes) in a Avid MediaStream
NSS. ConnectPlus 1000 provides high-speed connectivity with up to 300 Mbps performance
over industry-standard Gigabit Ethernet. Network data transfer uses Avid MediaStream’s
implementation of standard FTP (File Transfer Protocol) allowing you to use off-the-shelf
FTP clients. FTP allows easy integration of the gateway with Automation and Archive
systems.
Summary of Contents for MediaStream ConnectPlus 1000
Page 4: ...4 ...
Page 8: ...8 ...
Page 14: ...Using This Guide 14 ...
Page 18: ...Chapter 1 Introduction 18 ...
