Avid Technology MediaDock 2 Plus, Setup And User Manual

Page: 18 / 88

18
Front Panel
The front of the Avid MediaDock 2+ has controls and indicators for
determining its operating status (see
Figure 1-2 ).
The front panel power switch turns the drive’s internal power supply
on and off. Two light emitting diodes (LEDs) provide the status of the
unit. The SCSI ID switches provide the method for setting the drive
shuttle’s SCSI IDs. The label on the right side of the front panel is the
Avid product identification label.
Figure 1-2 MediaDock 2+ Front Panel
Detailed descriptions of the LEDs are provided in Table 1-1 .
Power LED (green)
Power switch
SCSI ID switches Thermal LED (red) Product label
NOTE: The label on your front panel might differ from the one shown.
Table 1-1 MediaDock 2+ LEDs
LED Function
Power LED The LED (green) is on when the enclosure is turned
on.
n
When the LVD shuttle bays are empty and the
power is on, the power LED might blink slowly.