Rack-Mounting the Equipment
37
Attaching the Inner Slide Rails
3. Repeat this procedure to attach the other inner slide rail on the other side of the server.
Attaching the Outer Rails to a Square-Hole Rack
After separating the slide rails as previously described (see
“Separating the Slide Rails” on
), perform the following procedure. If your mounting rails have threaded holes, see
“Attaching the Outer Rails to a Threaded-Hole Rack” on page 39
To attach the outer slide rails to the rack with square holes:
1. Align the outer slide rail bracket assembly with the front rack-mounding holes.
n
You should have someone helping you hold the slide rails level while you are positioning them in
the rack.
2. Slide the square tabs through the holes in the front, vertical rack-mounting rail.
Summary of Contents for ISIS 2000
Page 1: ...Avid ISIS 2000 Setup Guide...
