Rack-Mounting the Equipment
39
Securing the Outer Slide Rail to the Rear Rack-Mounting Rail
6. Repeat this procedure to attach the second outer slide rail on the other side of the rack.
Attaching the Outer Rails to a Threaded-Hole Rack
After separating the slide rails as previously described (see
“Separating the Slide Rails” on
), perform the following procedure. If your mounting rails have threaded holes, you first
need to clip on the threaded hole adapter.
To attach the outer slide rails to the rack with threaded holes:
1. Locate the four threaded hole adapters (which ship in the accessory kit's plastic bag, not in
the rack mount kit box) and position the adapter on the end of the outer slide rail bracket
assembly as shown in the following illustration.
Attaching the Threaded Hole Adapter to the Bracket Assembly
Round hole adapter
Outer slide rail bracket assembly
Bracket assembly tabs
Summary of Contents for ISIS 2000
Page 1: ...Avid ISIS 2000 Setup Guide...
