6
Configuring the Server for CIFS Access
This chapter describes how to configure the ISIS 2000 System Director for Common Internet
File System (CIFS) clients. The ISIS and CIFS clients share traffic on the same network port on
the back of the server.
c
Only System Directors with a 10 Gb connection to the switch support CIFS clients. The
recommended bandwidth setting is 100 MB/s so that there is little impact to ISIS clients.
If you have previously disabled the CIFS service because of a 1 Gb connection with the System
Director, you need to Start the CIFS service again. Revise these instructions
CIFS Service With a 1 Gb Connected System Director” on page 79
. This chapter contains the
following sections:
•
Creating Windows Users and User Groups on the System Director
•
Adding Users and Setting Permissions
•
Mapping Network Workspaces on CIFS Clients
Creating Windows Users and User Groups on the
System Director
You must add Windows users and user groups to the Avid ISIS System Director using the
standard Windows operating system process. The following procedures are provided to help with
that process, but for details on creating user and group accounts on the System Director,
right-click on the Local Users and Groups folder in the left pane of the Computer Management
window and select Help.
To create a local user account:
1. Right-click on My Computer and select Manage.
The Computer Management Window opens.
2. Expand Configuration > “Local Users and Groups” folder in the left pane.
3. Click Users.
4. Click Action > New User.
5. Type the appropriate information in the dialog box.
Summary of Contents for ISIS 2000
Page 1: ...Avid ISIS 2000 Setup Guide...
