Software Installation
79
Creating a Storage Group
You can only create a Storage Group after you have bound the Storage Managers see
the Storage Managers” on page 78
. A Storage Group requires at least one Storage Manager. The
ISIS 2000-120 Engine can be configured for one Storage Group, the ISIS 2000-240 Engine can
be configured for one or two Storage Groups. If you have multiple Engines, all the Storage
Managers can be configured as single Storage Group.
To create a Storage Group, click the Storage Group icon in the Management Console. See the
Avid ISIS Administration Guide
for additional information about creating a Storage Group.
Creating Workspaces
Workspaces are locations to store and segregate data. They appear as network drives to the
clients. You can allow users to access some or all of the workspaces, and assign permissions for
how each user can access the data in a workspace.
Create Workspaces after you have created your Storage Group. To create Workspaces, click
Workspaces icon in the Management Console. See the
Avid ISIS Administration Guide
for
information on creating Workspaces.
Creating User Accounts
User accounts allow individual users, or groups of users, access to the workspaces. These
accounts allow users to mount or map Avid ISIS workspaces on their workstations.
To add users, click the User icon in the Management Console. See the
Avid ISIS Administration
Guide
for additional information about creating new users.
Turning Off the CIFS Service With a 1 Gb Connected System Director
If you are using a 1 Gb connection between the ISIS 2000 System Director and the switch, you
must turn of the CIFS service. By default ISIS software starts the CIFS service using the 10 Gb
port.
c
Only System Directors with a 10 Gb connection to the switch support CIFS clients. If you
reconfigure your System Director to use a 10 Gb connection between the System Director
and the Switch, you must reset this service to run automatically.
n
If you upgrade or reload the ISIS software, this default CIFS setting is reset to automatically
start. You need to disable the setting each time the software is installed on the ISIS System
Director.
Summary of Contents for ISIS 2000
Page 1: ...Avid ISIS 2000 Setup Guide...
