manualshive.com logo in svg

Avid Technology AvidDock, Manual, Page: 37 / 39

Share
Download
Avid Technology AvidDock Manual Download Page 37

Appendix C: Compliance Information

31

EMC (Electromagnetic Compliance)

Avid declares that this product complies with the following standards regulating emissions and immunity:

• FCC Part 15 Class B
• EN 55022 Class B
• EN 55024 
• AS/NZS CISPR 22 Class B
• CISPR 22 Class B

FCC Compliance for United States

Radio and Television Interference

Australian Compliance

Canada ICES-003 Compliance

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. 

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le material brouilleur du Canada.

Korea Class B EMC Compliance

이 기기는 가정용

(B

급

) 

전자파적합기기로서 주

 

로 가정에서 사용하는 것을 목적으로 하며

, 

모

 

든 지역에서 사용할 수 있습니다

.

Japan VCCI B Compliance

CE Compliance

(EMC, Safety and RoHS)

Avid is authorized to apply the CE (Conformite Europenne) mark on this compliant equipment thereby declaring conformity to 
EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU and RoHS Directive 2011/65/EC.

Communication Statement

NOTE: This equipment has been tested and found to comply with the limits for 
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a res-
idential installation. This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation.  If this equip-
ment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try 
and correct the interference by one or more of the following measures:

• Reorient or locate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any modifications to the unit, unless expressly approved by Avid, could void the 
user's authority to operate the equipment.

Summary of Contents for AvidDock








































Reviews:

No comments