Avid Technology Avid Adrenaline, Manual

Page: 9 / 54

Avid Adrenaline Front and Rear Panel
9
n
There is also a headphone jack and volume control located on the front of the
Avid Adrenaline.
Four-Channel Audio I/O Board Identifiers
Number Label Function
1 ANALOG IN Connection for 25-pin DSUB to 4 XLRs (Professional) and 4 RCA
(Consumer) connectors
a
a. Gain control between –10 and +4 is controlled by a software switch.
2 ANALOG OUT Channels 1 – 4 Professional level audio output, male XLR connectors
• Channels 1 and 3 are left channels.
• Channels 2 and 4 are right channels.
n
The audio ANALOG OUT channels 1 – 4 are in different locations
depending on the version of your Four-Channel Audio I/O Board.
Check to see how your connectors are labeled
3 AES/EBU IN AES/EBU channels 1 and 2 digital input, female connectors
4 AES/EBU IN AES/EBU channels 3 and 4 digital input, female connectors
5 AES/EBU OUT AES/EBU channels 1 and 2 digital output, male connector
6 AES/EBU OUT AES/EBU channels 3 and 4 digital output, male connector
7 S/PDIF IN S/PDIF digital input, white phono (RCA) jack
8 S/PDIF OUT S/PDIF digital output, red phono (RCA) jack
9 OPTICAL IN 8 optical channels input
10 OPTICAL OUT 8 optical channels output
11 WORD CLOCK OUT Internal clock output to synchronize audio and video, BNC connector
b
b. Word Clock is used to signal the timing of digital audio data words. It is not timecode, which is used to indicate your
place in the program material. Word Clock takes care of the transmission of digital audio from AES/EBU, S/PDIF, or
optical connections. There is normally one device designated as the Word Clock Master (also known as House Clock)
in the studio. All other digital audio devices function as a slave to the House Clock.
— GAIN Gain controls for each audio channel