AJA Control Panel Function Screens
40
•
4-Out 4-In (Ch 1-4 out, Ch 5-8 in)
•
8-In
Delay In and Out
Here you can set up to 6 frames (in tenths of a frame) of delay for the AJA device's audio input and
output. The AJA Control Panel delays all audio outputs-SDI, HDMI, and Analog. This feature is
useful in compensating for the processing delay of a video monitor when audio is being monitored
directly from the Avid Artist | DNxIV (for example, when an audio mixer is connected to the DB25
analog audio inputs).
c
If you use this Control Panel delay, do not use other delay settings in your applications, as they
can conflict with one another.
Audio Mixer Screens
The Audio Mixer screen has two tabs; Playback and Capture. These tabs display what sources are
available for monitoring / mixing via the AJA hardware when in either of those two modes (if
applicable). The controls on this screen are dedicated only to monitoring adjustments, and do not
affect the level at which inbound audio signals are captured to storage.
The selection check boxes and screen slider controls affect the following Avid Artist | DNxIV
outputs:
•
SDI Embedded Audio Out
•
HDMI Embedded Audio Out
•
Analog Audio Out (via DB25 cable)
•
Front Panel Monitor Out (headphone jack) - This level can also be adjusted with the front panel
gain knob, and is additive to the screen slider controls.
c
Even though you can hear changes in the signals and levels adjusted with the Audio Mixer
screen, these changes are NOT recorded to disk during NLE Capture or Audio Punch In / Voice
Over to Timeline. In addition, muting or activating sources on this screen will not affect audio
signals being recorded. The Audio Mixer screen is dedicated for monitoring only, not program
mixing.
The branching arrow on the lower right indicates which sources are being routed for monitoring in
that operating mode, and is colored blue when active and red when disabled.
